CONSULT A SPECIALIST: +40 356 228 228
EXTRA CONTACT LOGIN menu

Neumann KH 150


Studio monitor

  • high-precision drivers with Mathematically Modeled Dispersion™ (MMD™) waveguide.
  • linear frequency response from 39 Hz to 21,000 Hz (±3 dB).
  • dSP engine enables adaptive room calibration via Neumann MA 1.
  • clear imaging due to extremely low tolerances (± 0.8 dB).
  • can be combined with other KH line speakers in immersive/surround configurations.
Neumann
1 63897
Currently unavailable. Request details
Central warehouse: 0
Add to cart
8673 points of loyalty
Shipping free
Warranty 24 months
Returns 14 days

Neumann KH 150 - Bi-amplified studio monitor, powered by DSP, with deep bass response and remarkable resolution.

Neumann Precision, Deep Bass and Plenty of Headroom

The KH 150 is a powerful bi-amplified studio monitor with reference performance. Its 6.5-inch woofer in a bass reflex cabinet offers astonishing low-end capability and high SPL, with undiminished clarity. The DSP-controlled electronics ensure a linear phase response and allow adaptive room calibration via Neumann's revolutionary MA 1 automatic monitor alignment.

What You Hear Is What You Get

The KH 150 follows the same philosophy as all Neumann studio monitors: the highest linearity, the lowest distortion, no coloration, and perfect adaptability to any acoustic environment. It allows you to hear every nuance of your tracks. Mixing becomes much faster, easier, and more creative.

Sounds brilliant, but can I get away with this? Is the voice bright or sibilant? Is there too much bass? The KH 150 will tell you. Honestly.

A Bigger One

What sets the KH 150 apart from its smaller siblings is its deeper bass response down to 39 Hz. It is almost as low as the larger KH 310, thanks to the new high-precision 6.5-inch woofer of the KH 150 in a carefully designed bass reflex cabinet. The KH 150 is therefore ideal for urban music, EDM, film music, and all styles that require extended low levels and/or high listening levels. Thanks to powerful amplifiers (145 W/100 W) and sophisticated protection limiters, no clarity is lost even at high SPLs. But, being a true universalist, the KH 150 performs just as well for any genre, from rock to classical music, broadcasting applications, and voice-over work.

The KH 150 has an exceptionally linear frequency response from 39 Hz to 21 kHz (±3 dB). Not only that: it linearizes the phase response too! This translates to clear mids, with astonishing transparency, as well as extreme accuracy in the time domain: precise reproduction of transients and finely resolved reverbs. This is made possible by the DSP-controlled electronics that allow sophisticated transitions while avoiding phase distortion caused by analog filters. The internal DSP also sets new standards in tonal consistency. The KH 150 is manufactured to extremely low tolerances of no more than ± 0.8 dB! And you can hear it too: stereo imaging is clear.

Ready for Your Room

Even the best speaker sounds as good as the acoustic environment allows. Neumann's Mathematically Modeled Dispersion™ (MMD™) waveguide guarantees a wide sweet spot and minimizes reflections from the desk. But the KH 150 goes much further: its internal DSP allows room calibration through Neumann's revolutionary automatic monitor alignment. MA 1 (sold separately) ensures that the DSP monitors are optimally adapted to the character of your room and perfectly calibrated for your listening position. Even in acoustically treated rooms, this results in a huge improvement.

Tonal compatibility with other KH line studio monitors makes it possible to use the KH 150 in mixed configurations, e.g. in immersive/surround setups. For flexible connectivity, the KH 150 features both analog and digital inputs.

AES 67 – Audio Over IP

Additionally, the KH 150 AES67 model variant offers integrated redundant AES67 audio network ports that are fully compatible with broadcasting standards such as ST 2110, ST 2022-7 redundancy, and RAVENNA. At the same time, the KH 150 AES67 is compatible with AES67 network streams generated by DANTE®.

Energy Efficient

Neumann engineers took great care to develop a patent-pending amplification technology that combines superior audio performance with class D energy efficiency. Although the KH 150 amplifiers deliver up to 145 W to the 6.5" woofer and 100 W to the 1" tweeter, they consume only 17 W. The automatic standby reduces power consumption to 0.3 W when the KH 150 has not been used for a while, but can be disabled.

Mounting Options

Most KH 120 accessories also fit the KH 150, with the exception of the LH 65 table stand, which is available in a slightly larger version as the new LH 66 (cat. no. 700258). The LH 61 (L stand) has been updated as the KH 150 is slightly heavier/larger than the KH 120, and the LH 64 (VESA mount) has been adjusted to allow access to the KH 150 controls. The order numbers remain unchanged here.

All mounting options can be found in the monitor mounting matrix.


Features:

  • High-precision drivers, Mathematically Modeled Dispersion™ (MMD™) waveguide.
  • Linear frequency response 39 Hz - 21,000 Hz (±3 dB)
  • Linear phase response 105 Hz - 16,000 Hz (± 45°) with latency < 2.6 ms
  • DSP engine enables adaptive room calibration via Neumann MA 1
  • Clear imaging due to extremely low tolerances (± 0.8 dB)
  • Can be combined with other KH line speakers in immersive/surround configurations.

 Technical Specifications:

Free field frequency response ±6 dB 36 Hz - 21,000 Hz
Free field frequency response ±3 dB 39 Hz - 20,400 Hz
Free field frequency response in passband 42 Hz - 20,000 Hz, ±1.25 dB
Free field linearity deviation between 100 Hz and 10,000 Hz ±0.8 dB
Self-generated noise at 10 cm (input gain set to 100 dB SPL for 0 dBu)  

Sine wave output with a THD < 0.5 % at 1 m in half space

95 dB SPL (>75 Hz) 
Max. SPL calculated in half space at 3% THD at 1 m (averaged between 100 Hz and 6,000 Hz) 118.7 dB SPL
Max. SPL in full space at 3% THD at 1 m (averaged between 100 Hz and 6,000 Hz) 112.7 dB SPL
Bass capacity: max. SPL in half space at 3% THD at 1 m (averaged between 50 Hz and 100 Hz) 107.5 dB SPL
Max. short-term SPL with IEC-weighted noise at 1 m, in typical listening conditions 108 dB(C) SPL
Max. short-term SPL with music material at 2.3 m in typical listening conditions (pair/full range) 100 dB(C) SPL
Max. short-term SPL with music material at 2.3 m, in typical listening conditions (pair with subwoofer) 106 dB(C) SPL
Max. long-term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair full range) 88 / 94 dB(C) SPL 
Max. long-term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair with subwoofer) 88 / 94 dB(C) SPL
Dolby D.A.R.D.T. Max SPL range 114 dB
Dolby D.A.R.D.T. Max managed bass SPL 120 dB
Recommended listening distance 1.0 - 2.5 m; (3' - 8')
Feasible listening distance 0.75 - 6.0 m; (2'6" - 18')
Acoustic principle Bass reflex, ports in front
Analog inputs XLR: electronically balanced analog
Analog input impedance 24 kOhms

Max. input level

+24 dBu for 94 dB SPL setting

+14 dBu for 100 dB SPL setting

+9 dBu for 108 dB SPL setting

-1 dBu for 114 dB SPL setting

Common mode rejection ratio (CMRR) > 56 dB @ 15,000 Hz
Volume control Via MA 1 software
Volume control range; resolution 0 - -∞ dB; 0.1 dB
Analog dynamic range; THD+N 118 dB, A-weighted, 90 dB
Signal routing modes Analog, S/PDIF L, S/PDIF R, S/PDIF mono
Digital inputs RCA (75 Ω): S/PDIF
Digital outputs RCA (75 Ω): S/PDIF
Max. Input level; pk-pk, unbalanced / balanced 1.2 V
Digital converter: resolution; design 24 Bits
Digital converter: sampling rate 32 kHz - 200 kHz
Internal digital sampling frequency 48 kHz
Output sampling rate Identical to input sampling rate
ADA / DA latency

Analog input: 2.6 ms

SPDIF input: 2.1 ms

Delay: user-adjustable delay interval 0 - 120 ms
Delay: Resolution: time; distance 20.8 μs
Delay: max. audio-video sync frames 0 - 120 ms for TOF=0ms, depends on APP implementation
Delay: max. time-of-flight distance 0 - 120 ms for lipsync=0ms, depends on APP implementation
Transport/storage conditions -25° C to +60° C; <90% RH
Input gain control (sensitivity) 0 dB - -15 dB
Output level control (output level at 1 m based on 0 dBu input level) 94; 100; 108; 114 dB SPL
Equalization: Bass 0; -2; -4; -6 dB
Equalization: Low-Mid 0; -2; -4; -6 dB
Equalization: Treble +1; 0; -1; -2 dB
Input selector Analog; S/PDIF L; S/PDIF R; Mono
Ground Lift Yes
Control Local; Network
Network switch Yes
Network voltage selection Universal power supply 100 V~ - 240 V~ 
Controller design Digital; active
Crossover frequency 1700 Hz
Crossover slope 48 dB / octave
Room calibration via MA 1  Yes
FIR phase correction Linear phase (105 Hz - 16,000 Hz; +/- 45°)
Protection circuits

Independent soft clip

Peak and thermal limiters for woofer and tweeter

Woofer excursion limiter

Thermal limiter for electronics and amplifiers

Subsonic filter: frequency; slope 38 Hz; 12 dB / octave
Remote Control MA 1 software via RJ45 connector carrying standard IP data
Display: On; Normal operation Neumann Logo “White”
Display: Identification Neumann Logo “Rose”
Display: Limiting / Clip / Errors / Protection / Boot Mute / Shut Down Mute Neumann Logo “Red”
Logo brightness Via MA 1 software
Woofer amplifier output power (THD+N with limiter off: 10%) 145 W
Tweeter amplifier output power (THD+N with limiter off: 10%) 100 W
Woofer amplifier output power (THD+N with limiter off: 0.1%) 120 W
Tweeter amplifier output power (THD+N with limiter off: 0.1%) 80 W 
Power supply: input voltage; frequency 100-240 V; 50/60 Hz
Power consumption (230 V / 100 V): Standby  0.3 W
 Power consumption (230 V / 100 V): Idle 15 W
Power consumption (230 V / 100 V): Full output 320 W
Inrush current (peak) 33 A
Standby Automatic, 90 minutes (default); user-defined in software
Housing material Composite polycarbonate front and rear, wooden enclosure
Surface finish; colour (front/rear) Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
Operating conditions +10° C to +40° C; < 75% RH
Woofer 165 mm; (6.5") with black metal protective grille
Tweeter 25 mm; (1") with black metal protective grille
Mounting points 2 x M6 threaded inserts with 70 mm spacing on the rear panel; thread depth 15 mm
Product dimensions (height x width x depth) 345 x 225 x 273 mm
Net internal volume 12.6 l
Net external volume 20.4 l
Packaging dimensions (height x width x depth) 480 x 303 x 403 mm
Product weight 8.0 kg
Weight including packaging 9.4 kg
Packaging weight including cables and manuals 1.41 kg

Diagrams

Acoustic controls for lows, low-mids, and highs

Acoustic controls for lows, low-mids, and highs

 

Frequency response

Frequency response

 

Group delay

Group delay

 

Harmonic distortion at 80 dB SPL

Harmonic distortion at 80 dB SPL

 

Harmonic distortion at 85 dB SPL

Harmonic distortion at 85 dB SPL

 

Harmonic distortion at 90 dB SPL

Harmonic distortion at 90 dB SPL

 

Harmonic distortion at 95 dB SPL

Harmonic distortion at 95 dB SPL

 

Max SPL at 1 m

Max SPL at 1 m

 

Phase response

Phase response

 

Spectrogram

Spectrogram

Product code: 509127

Unit of sale: piece

Specifications:
Woofers: 6.5"
Number of ways: 2
Tweeter type: Dome
Correction type: Manual DSP
Power: 245 W
Bluetooth connectivity: no
Cabinet type: Front port bass reflex
Accessories & recommendations
LH-28 LH-28
Neumann LH-28
7824
Neumann LH-28
Similar products in stock
DM-40D DM-40D
Pioneer DJ DM-40D
18566
in stock
Pioneer DJ DM-40D
Eris 3.5 Mk2 Eris 3.5 Mk2
Presonus Eris 3.5 Mk2
9088
in stock
Presonus Eris 3.5 Mk2
Eris Studio 8 Eris Studio 8
Presonus Eris Studio 8
19681
in stock
Presonus Eris Studio 8
HS8 White HS8 White
Yamaha HS8 White
27115
in stock
Yamaha HS8 White
nEar i8 nEar i8
ESI nEar i8
15332
in stock
ESI nEar i8
iLoud Micro Monitor iLoud Micro Monitor
IK Multimedia iLoud Micro Monitor
29531
in stock
IK Multimedia iLoud Micro Monitor

Customer reviews:

WhatsApp Messenger Instagram