LD Systems MAUI 11 G3, a compact column-type sound system that delivers huge, powerful, and precise sound, with an RMS power of 730 W (peak of 1,460 W), suitable for all applications: as a main PA for concerts, sound system for mobile DJs, or public address system at weddings, corporate events, and more.
The columns are equipped with 6 mid-range drivers of 3.5 inches and 2 tweeters of 1 inch, providing uniform sound distribution with constant horizontal dispersion combined with the innovative phase plug design. Additionally, the curved wave guide in front of the tweeters transports high frequencies even into the audience areas at the back.
The MAUI 11 G3 columns are designed as cardioid units. This allows control of low-mid frequencies in front and up to 18 dB of attenuation at the back, resulting in a clean sound on stage. Equipped with two 8-inch woofers and four bass reflex ports, the MAUI 11 G3 subwoofer delivers clear, tight, and powerful low levels down to 39 Hz. By using a second subwoofer, the bass response can also be increased by up to 6 dB and can also be driven in cardioid configuration by pressing a button (cardioid preset).
Features:
- Bluetooth audio streaming
- Cardioid column
- DSP-based signal processing
- Excellent sound dispersion
- Mono/stereo application
- Bluetooth 5.0, True Wireless Stereo (TWS)
- Support for AAC and SBC codecs
Technical Specifications:
- General:
- Colour: White
- Max. SPL (peak): 125 dB
- Frequency response (-10dB): 39 - 20,000 Hz
- Dispersion (H x V): 120° x 30°
- Total height: 2052 mm
- Weight: 30.7 kg
- Subwoofer:
- Woofer: 2 x 8"
- Magnet: Ferrite
- Voice coil: 2"
- Cabinet construction: Bass Reflex
- Cabinet material: 15 mm birch plywood
- Cabinet surface: Polyurea
- Dimensions: 305 x 607 x 403 mm
- Weight: 20.5 kg
- Mid/Hi System:
- Mid dimensions: 6 x 3.5"
- Mid magnet: Ferrite
- Mid voice coil: 0.75"
- Tweeter: 2 x 1"
- Tweeter magnet: Neodymium
- Tweeter voice coil: 1"
- Wave Guide: CD Waveguide
- Speaker inputs: 1
- Custom multipin speaker input connections
- Cabinet construction: Passive cardioid
- Cabinet material: Aluminium
- Cabinet surface: Powder coated
- Width: 103 mm
- Height: 1460 mm
- Depth: 135 mm
- Weight: 10.2 kg
- Amplifier module (integrated in subwoofer):
- Amplifier: Class D
- Power (RMS): 730 W
- Power (peak): 1460 W
- Protection circuits: DC protection, multiband limiter, short circuit, thermal protection
- Cooling: Convection
- Controls: Bluetooth HOLD TO LINK button, Cardioid On/Off, Main level, Power On/Off, Secondary level
- Indicators: Bluetooth, Cardioid On/Off, Limiter, Power, Protection (protection circuit activated), Signal, Subwoofer mode
- Network connector: IEC power cable (included)
- Voltage: 100 V AC - 120 V AC, 50 - 60 Hz, 220 V AC - 240 V AC, 50-60 Hz
- Fuse: T 3.15AL / 250 V
- Power consumption: 300 W
- Operating ambient temperature: 0 - 40 °C
- Relative humidity: < 80% (without condensation)
- Line inputs: 2
- Line input connectors: Combo XLR / TRS
- Line outputs: 1 x Sub OUT, 2 x THRU
- Line output connectors: XLR male
- Number of speaker outputs: 1
- Speaker output connectors: Custom multipins
- Bluetooth standard: A2DP
- Bluetooth audio decoder: AAC, SBC
- DSP Features:
- AD/DA converter: 24 bits
- Sampling frequency: 48 kHz
