PowerMate 3000-X combines advanced amplification and DSP technology from Dynacord DSP amplifiers with the intuitive interface of a classic mixer. The compact 19-inch and 3U housing can be rack-mounted, installed under a table, or used as a desktop device. It features four amplification channels of up to 1,000 W per channel, for high-impedance (100V) or low-impedance speaker systems. It includes integrated FIR-Drive processing for speakers and a 10-channel mixer. Thus, the PowerMate 3000-X is the ideal all-in-one solution for small gyms, places of worship, small music clubs, and event spaces in HoReCa and the leisure sector.
Web interface and classic analogue mixer sound
The web mixing interface retains the familiar layout and sound of the classic PowerMate. Setup and use are intuitive, and the sound results are proven. From microphone preamps to equalizers and mixing behaviour, the PowerMate 3000-X has been designed to match its iconic predecessor.
Complete processing on each channel
The 8 mic/line channels and the USB channel feature a classic 4-band equalizer, with a switchable high-pass filter and the “Vocal Voicing” function. This allows for excellent sound with minimal adjustments. For more advanced applications, use the X-TRA section, which offers a semi-parametric 4-band equalizer, compressor, and noise gate.
USB interface and file player
The dedicated USB input channel allows playback through the integrated class-compliant USB 2×2 audio interface or from a USB stick. The USB source can be automatically attenuated (ducking) by any of the selected mic/line inputs.
Flexible control: user pages and Virtual Control Panel
In addition to the complete web interface, the PM3000-X offers two mixing pages for users, with individually customisable access rights. Users who are not mixing can control the system through the Virtual Control Panel. This works on mobile or fixed devices that have a web browser.
Additional control options
Additional control options include hardware control via GPI for simple preset changes or volume adjustments, as well as MIDI control for integration with musical equipment.
Stereo effect processors and presets
The two Dynacord stereo effect processors include the renowned PowerMate FX effects, with 100 factory presets and 20 user presets. They offer a wide range of reverbs, delays, and modulation effects. The mixing page configuration can be saved in 10 user presets for quick recall in different usage scenarios.
- 4-channel DSP amplifier, total power of 3 kW, Hi-Z/Lo-Z operation and FIR-Drive processing for speakers
- 8 mic/line inputs with 48 V phantom power, class-compliant USB 2×2 audio interface, and playback from USB stick
- Intuitive web mixing interface for installation, setup, and mixing
- Configurable Virtual Control Panel and customisable mixer interfaces for users, with restricted access rights
- Combo XLR/TRS inputs and twist-lock speaker connectors for convenient cabling
Specifications:
- Amplification:
- Total nominal output power 3000 W
- Number of amplification channels 4
- Maximum output power:
- All channels driven equally: 750W @ 2Ω 750W @ 2.7Ω 600W @ 4Ω 750W @ 8Ω
- Maximum per channel: 1000W @ 2Ω 800W @ 2.7Ω 600W @ 4Ω 1000W @ 8Ω
- Direct Drive (100V):
- All channels driven equally: 750W
- Maximum per channel: 1000W
- Voltage gain, ref. Line Out (Lo-Z / 70 V / 100 V modes): 30 dB / 33 dB / 36 dB
- THD+N (3 dB below maximum, 1 kHz, AES17): < 0.1%
- Output stage topology: Class D, fixed frequency
- Mixer:
- Mic/Line Inputs
- Channels 8
- Gain 0 – 60 dB
- Phantom power +48 V, switchable on each input
- Line attenuation 14 dB
- Maximum mic input level, balanced/unbalanced +18 dBu / +12 dBu
- Maximum line input level, balanced/unbalanced +32 dBu / +22 dBu
- Mic / Line input impedance (balanced) 3.4 kΩ / 18 kΩ
- E.I.N. (A-weighted) @ 150 Ω -127 dBu
- CMRR (gain 30 dB, 1 kHz) > 80 dB
- A/D conversion 24 bit, dynamic range 120 dB(A)
- Line Outputs
- Aux mix buses 1, 2, Master, PFL
- Mix outputs Aux 1, Aux 2, Master, Master B, Phones
- Maximum output level +18 dBu
- Line output impedance 100 Ω, active balanced
- Output noise (A-weighted, fader at minimum) < -96 dBu
- Headphone output drives headphones of 16 – 250 Ω
- D/A conversion 24 bit, dynamic range 115 dB(A)
- Signal processing per channel
- High-pass filter 80 Hz, 24 dB/oct.
- Vocal Voicing special filter for voice enhancement
- 4-band EQ Lo-Shelf (60 Hz), Lo-Mid (300 Hz), Hi-Mid (3 kHz), Hi-Shelf (12 kHz), ±15 dB
- X-TRA EQ+ Low Shelf/Bell (Q = 3.0), 20 Hz – 200 Hz, ±15 dB
- Lo-Mid, Q = 1.0 / 3.0, 100 Hz – 2 kHz, ±15 dB
- Hi-Mid, Q = 1.0 / 3.0, 400 Hz – 8 kHz, ±15 dB
- High Shelf/Bell (Q = 3.0), 2 kHz – 20 kHz, ±15 dB
- X-TRA Compressor Threshold, Ratio, Gain, slow/fast, Bypass
- X-TRA Noise-Gate Threshold, Depth, Hold, slow/fast, Bypass
- Automixer Gain-sharing for channels 1–8
- Ducker for USB input (triggered by channels 1–8)
- PAN / BAL Channels 1–8 / USB
- Level, Mute, Input VU meter Channels 1–8, USB input
- 2 × stereo graphic equalizers (Master, Master B), 2 × mono (Aux 1, Aux 2)
- Graphic equalizer frequencies 63, 100, 160, 250, 400, 630 Hz; 1.0, 1.6, 2.5, 4.0, 6.3, 12.0 kHz; ±10 dB
- Anti-feedback filter (Aux 1 and Aux 2) Notch filter (Q = 10), 70 Hz – 7 kHz
- 10 mixer presets
- Effects
- 2 × Classic Dynacord Stereo FX effect processors (reverbs, delays, etc.)
- 100 factory presets, with 4 editable parameters
- 20 user presets for each effect processor
- USB
- Audio interface 2 inputs × 2 outputs, 44.1 / 48 kHz, class-compliant
- File player (Media) 44.1 / 48 kHz, WAV, MP3
- Input level equivalent +18 dBu @ 0 dBFS
- Output signal processing
- Sampling rate 48 kHz
- Processing for speakers FIR-Drive settings for 8 outputs (4 amplifier channels, Aux 1 and 2, Master B)
- Output delay 8 × 300 ms (4 amplifier channels, Aux 1 and 2, Master B)
- 10 output presets
- GPI control port
- GPI control port 3 × GPI, analog input / digital input mode
- Type 1 × Euroblock with 8 pins, male
- Analog input range 0 V – +13 V, input resistance 133 kΩ
- Digital input ON: < 1.5 V, OFF: > 2.0 V, internal pull-up (10 kΩ / 10 V)
- Reference voltage output +10 V, max. 200 mA, monitored, short-circuit protected
- READY/FAULT contact Galvanically isolated relay, max. 30 V DC / 500 mA DC
- General:
- Power supply topology Switch-mode power supply, digitally controlled power factor correction (PFC)
- Protections Audio limiters, high temperature, DC, HF, short circuit, Back-EMF, peak current limiters, inrush current limiters, mains current limiter, mains over/under voltage protection
- Cooling Front to back, temperature-controlled fans
- Operating temperature +5 °C – +40 °C
- Dimensions (L × H × D), without rack ears 444 mm × 133 mm × 300 mm
- Weight 10.4 kg