Sennheiser EW-DX 835-S Set Q1-9 - This set consists of 2 x EW-DX SKM-S (portable with sound switch), 2 x MMD 835 capsules (cardioid, dynamic), 1 x rack receiver EW-DX EM 2 (2 channels) and 2 x rechargeable BA 70 batteries.
Portable digital wireless all-in-one set for those who sing or speak - featuring the renowned e 835 capsule from Sennheiser.
- Dynamic input range of 134 dB - no need to set the gain on your wireless transmitters at all, thanks to Sennheiser's patented Performance Audio Codec (SePAC)
- The AutoScan function quickly scans your environment and implements equidistant channel spacing frequencies - even without RF knowledge
- Network-enabled for extended remote control with Sennheiser Control Cockpit, Wireless System Manager (WSM - available mid-2023) and third-party media control systems via plug-in
- Remote control via the Smart Assist app via Bluetooth® Low Energy (BLE) at distances of up to 25 metres (available late 2023)
- Secure transmission of confidential content using AES 256 encryption
- Up to 12 hours of operation with rechargeable lithium-ion battery BA 70 (sold separately)
- Function buttons - control all transmitter settings directly from the bodypack, including the button lock function
- Persistent E-Ink display for “always on” information - parameters visible on screen even when you remove the batteries
- Equidistant channel spacing for easily allocating channels without intermodulation: Standard mode with 600 kHz spacing for up to 146 channels; Link Density (LD) mode with 300 kHz spacing for up to 293 channels
- Switching bandwidth of up to 88 MHz
- Low transmission latency of 1.9 ms due to Sennheiser's Performance Audio Codec (SePAC)
- Digital audio trim
- Transmitters with charging contacts for in-device charging with the CHG 70N charger (sold separately)
- Sennheiser Standard Capsule Interface - compatible with a wide range of Sennheiser and Neumann capsules (sold separately)
- Versatile charging options available optionally: CHG 70 N, L 70 USB, LM 6070 module for complete rack charging station L 6000 (available in 2023)
- Worldwide use (specific frequencies are subject to local RF regulations)
Technical Specifications:
- UHF transmission frequency range: 470.2 - 550 MHz
- Bluetooth® Low Energy (BLE) frequency range: 2405 - 2480 MHz
- Audio frequency response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs
- THD, total harmonic distortion: ≤ -60 dB for 1 kHz @ -3 dBfs input level
- Dynamic range: 134 dB
- System latency: 1.9 ms
- RF technology: Intelligent switching diversity
- Operating temperature: -10 °C - +55 °C
- Operating relative humidity: 5 - 95 % (without condensation)
- What's in the box:
- EW-DX EM 2 rack receiver
- 2 EW-DX SKM-S portable transmitters
- 2 MMD 835 microphone modules
- EW-D power supply with country adapters
- 2 rechargeable BA 70 batteries
- 2 MZQ 1 microphone clamps
- 2 rod antennas
- GA 3 rack mount kit
- 4 rubber feet
EW-DX EM 2 (rack receiver):
- Input voltage: 11 - 13 V ⎓ or PoE IEEE 802.3af Class 0
- Input current: ≤ 1A
- Transmission power: BLE: max. 10 mW EIRP
- Audio output power: 18 dBu max.
- Ethernet:
- RJ-45 connector, IEEE802.3
- 100Base-TX (half+full duplex)
- 10Base-T (half+full duplex)
- (CAT5e or higher)
- Dimensions: 212 x 44 x 189 mm
- Weight: Approximately 1000 g (without antennas and power supply)
EW-DX SKM (portable transmitter):
- Input voltage: 2.0 - 4.35 V
- Input current: ≤ 300 mA
- Power supply: 2 AA 1.5 V batteries (alkaline manganese) or rechargeable BA 70 battery pack
- Occupied bandwidth: 200 kHz
- Transmission power (radiated): Audio link: 10 mW ERP, (Range Y1-3): 12 mW ERP, LD mode: 10 mw ERP, BLE: max. 10 mW EIRP
- Dimensions: 50 x 268 mm (including MMD 835 microphone module)
- Weight:
- Approximately 304 g (including MMD 835 microphone module)
- Approximately 195 g (without microphone module)
MMD 835 (microphone module):
- Capsule type: Dynamic
- Sensitivity: 2.1 mV/Pa
- Sound pressure level (SPL): 154 dB
- Polar pattern: Cardioid
