Klark Teknik DN200 V2

Klark Teknik DN200 V2 - a compact and robust active DI box with 2 channels.  It ensures electrical separation between PA equipment, suitable for professional applications where +48 V phantom power is a standard feature on all mixing consoles. Its innovative design results in a significantly higher cut-off point than many other active DI boxes, providing an output of +10 dBu into a load of 2 KΩ. This increased headroom means that much higher level input signals can be accepted without the need for an attenuation pad. Combined with a very low noise input circuit topology, the DN200 offers a very wide dynamic range and only requires the -20 dB pad when connected directly to instrument amplifier outputs or other very high-level signal sources.

• Inputs - 2 x XLR combo, 2 x 1/4" TRS link connectors, 1 x 1/8" stereo TRS jack.
• Impedance: 1 MΩ (combo jacks and balanced link jacks), 20 kΩ (XLR combo only), 500 kΩ (unbalanced 1/8" stereo TRS jack)
• Maximum input level - 28 dBu for combo XLR jacks and TRS link jacks (pad activated), 21 dBu for 1/8" TRS jack (pad activated)
•  20 dB attenuator
• Outputs – Connectors - 2 x 3-pin XLR / Impedance 50 Ω
• Maximum output level 13 dBu with a load of 10 kΩ, 10 dBu with a load of 600 Ω
• 103 dBu, from 22 Hz to 22 kHz unweighted, with the input terminated with a 10 kΩ resistor
• Frequency response - From 20 Hz to 20 kHz, ±1 dB, 10 kΩ load
• Distortion (THD + N) Typically <0.005% at 1 kHz, +10 dBu
• Power requirement +48 V phantom
• Dimensions - 118 x 63 x 142 mm (4.7 x 2.5 x 5.6")
• Weight 0.65 kg (1.43 lbs)