Part of the TICA® series, the PRE2 is a compact two-channel line and mic mixer. Ideal for smaller installations, it allows you to mix stereo audio from any media source with a microphone for announcements.
The PRE2 is incredibly easy to use with two simple volume control knobs, with signal presence and clip indicators.
The built-in audio ducking function automatically reduces the music level from the stereo line input when an announcement is being made. Connect a wired remote for simple master volume control. Dip switches let you configure it to work in stereo or mono mode.
Its tiny form factor (106 × 44 × 222 mm) and included mounting plates allow it to be installed discreetly behind screens or under tables. Alternatively, it fits into a ¼ 19-inch rack. Use the optional rack tray to slot up to four TICA® series products alongside each other and build a system to your exact requirements, using minimal rack space.
The PRE2 uses an external 24 V power supply. Terminal block connections for the analogue inputs and outputs make wiring easy.
Specifications:
Product type: Installation mixer preamplifier
Mic inputs: 1
Line inputs: 1 x stereo
Line outputs: 1 x stereo
Cooling: Convection
Priority levels: 2
Nominal input sensitivity: 15 mVrms
Nominal input clipping: 550 mVrms
Frequency response (-3 dB): 150 Hz - 20000 Hz
Gain: Mic: 18 to 48 dB
PAD: -20 dB switchable
Phantom power: + 24V, 10mA switchable
VOX Threshold: Mic: 0%: Off, 25%: -40 dBu, 50%: -50 dBu, 100%: -63 dBu
Connector: 3-pin terminal block (3.81 mm)
Nominal input sensitivity line: 12 dBu ( Sine 1 kHz, Gain max )
Nominal input clipping line: 14 dBu ( Sine 1 kHz, Gain max )
Frequency range (- 0.5 dB): 15 Hz - 30000 Hz
Gain line input: 3 dB
Line Input Connectors: 2 x 3-pin Terminal Block, pitch 3.81 mm
Line Output Connectors: 3-pin terminal block (3.81 mm)
Max. output level: 16 dBu
Connector (VCA): 3-pin Terminal block, pitch (3.5 mm)
Main Volume (VCA): 10 k (Linear Taper) External Potentiometer
Type: External SMPS
Operating voltage: 100 V AC - 240 V AC, 50 - 60 Hz
Power supply plugs: Type A - USA/Canada, Type C - EU, Type G - UK, Type I - Australia
Power Supply Secondary: 24 V DC / 500 mA
Power consumption (max.): 6 W
Idle power consumption: 5 W
Standby power consumption: < 1 W
Rack width: 1/4 19"
Operating temperature ( non-condensing ): 0°C - 40°C; < 85% humidity, non condensing
Accessories (included): External power supply with interchangeable plugs, Mounting plates for surface mount applications
Optional accessories: Rack mounting hardware ( LDTICARK )
Weight: 1,42 kg
