LD Systems AMP 205 Dante - Compact power amplifier, specially designed for integration into Dante audio systems. It is equipped with a Class D amplifier, delivering 2 × 50 W at 4 Ohms, and the Dante connectivity allows for easy integration into any Dante ecosystem, being fully compatible with AES67 and Dante Domain Manager. Power can be supplied either via PoE+ or through the included 24 V power source, offering flexibility in installation.
It can be mounted in a 1/3 19” rack, and with the optional tray, up to four units from the TICA® series can be integrated, saving valuable space. Connections are made via analog terminal blocks and GPIO, and remote control through third-party devices allows for volume adjustment or activation of standby mode, even when the amplifier is hidden. The optional auto-standby function helps reduce power consumption in the absence of audio signal.
Features:
- Professional mini amplifier with Dante
- Class-D amplifier 2×50 W with low impedance outputs
- Compact format with passive cooling
- Remote control for standby and volume
- Power supply via PoE or external source 100–240 V
- Mounting plates for flexible and discreet installation, including above suspended ceilings
- Auto-standby function for energy saving
- 2 balanced line outputs and speaker outputs on terminal blocks
- Intuitive front panel with LEDs for signal, clip, and protection
- Optional rack tray for combination with other products from the TICA® series
Specifications:
- Compact power amplifier
- Digital inputs: 1 x Dante (2 channels), 100 BASE-T
- Line outputs: 2
- Line output connectors: Balanced outputs with automatic mute relay on loss of Dante/AES67 signal
- Amplifier outputs: 2, with mode selector (Stereo / High Power Mode)
- Cooling: By convection
- Remote control (3rd Party): Main volume (VCA): External potentiometer 10 kOhm (linear), 3-pin terminal block, 3.5 mm pitch
Dante™ Connection:
- Audio channels: 2 outputs
- Colour depth: 24 / 32 bits
- Sampling: 48 kHz
- Latency: Minimum 1 ms
- Connector: RJ45, 100 BASE-T
Amplifier Output:
- Amplifier type: Class D
- Operating modes: Stereo, parallel, High Power Mode (ST / PAR / HPM)
- Outputs:
- 2 channels (Stereo)
- 1 channel (High Power Mode)
- Output connector: 4-pin terminal block, 5.08 mm pitch
- RMS Power:
- 2 × 50 W @ 4 Ohm (ST)
- 1 × 100 W @ 2 Ohm (HPM)
- With PoE++: 2 × 30 W @ 4 Ohm (ST), 1 × 60 W @ 2 Ohm (HPM)
- Minimum impedance: 4 Ohm (ST), 2 Ohm (HPM)
- THD + N: < 0.05% (-25 dBFS, 20 kHz BW, unweighted)
- Noise: < -75 dBu
- SNR: > 102 dB (-1 dBFS, 20 kHz BW, A-weighted)
- Frequency response (-1 dB): 15 Hz – 20 kHz
- Protections: DC protection, overcurrent, short circuit, overtemperature, undervoltage
Analog Line Outputs:
- Number of outputs: 2
- Maximum output level: 15 dBu
- Intermodulation distortion (SMPTE): < 0.02% (-20 dBFS up to 0 dBFS)
- THD + N: < 0.005% (0 dBFS, 20 kHz BW, unweighted)
- Idle noise: < -85 dBu
- SNR: > 103 dB (-1 dBFS, 20 kHz BW, A-weighted)
Physical Parameters/Mounting:
- Mounting options:
- Can be mounted in a 1/3 19” rack (with optional rack ears, not included)
- Can be discreetly installed behind screens, under tables, or above suspended ceilings.
- Dimensions: 106 × 44 × 222 mm
- Weight: 1.66 kg
