Genelec 1237 APM - active 3-way studio monitor, featuring AutoCal™ technology and Genelec Loudspeaker Manager GLM. It is ideal for use alongside other monitors in the SAM series. It utilises the new RAM-L (Remote Amplifier Module), which is mounted on vibration dampers on the back of the monitor's casing and can be removed for installation in a 19" rack system. It benefits from automatic configuration and calibration.
Features:
- Active 3-way SAM (Smart Active Monitor)
- Cabinet material: MDF (12" + 5" + 1")
- RAM-L amplifier (Remote Amplifier Module)
- Auto calibration technology (AutoCal technology)
- GLM technology (Genelec Loudspeaker Manager)
- Balanced analog input: XLR balanced
- Digital input AES/EBU and Thru: XLR
- Finish: painted
Technical specifications:
- Inputs/Outputs:
- Analog input: XLR
- Digital input: AES/EBU XLR single wire or dual wire
- Digital output/Thru: AES/EBU XLR single wire or dual wire output
- Network control: 2x RJ45 CAT5 cables (Proprietary GLM network)
- External amplifier module: 2x Speakon (when removed from the monitor)
- Word Length: 16 to 24 bits
- Sample Rate: 32 to 192 kHz
- Digital input sensitivity (100 dB SPL at 1 m): -30 dBFs
- Digital input gain adjustment: 0, +6, +12, +18 dB
- Crossover frequency:
- Low/Mid: 450 Hz
- Mid/High: 3,000 Hz
- Notch Filters: 4 LF and 2 HF
- Shelving Filters: 2 LF and 2 HF
- Calibration: Genelec GLM AutoCal
- Analog input impedance: 10 kΩ
- Drivers:
- Low 12"
- Mid 5" made in Finland
- High 1" metal dome with Directivity Control Waveguide (DCW)
- Amplification:
- LF: 500 W Class D amplification
- MF: 250 W Class D amplification
- HF: 200 W Class AB amplification
- THD:
- Amplification at nominal output: <0.01%
- Signal-to-noise ratio
- Low: > 115 dB
- Mid: > 115 dB
- High: > 115 dB
- Low-pass filter: < 35 Hz
- High-pass filter: > 21,000 Hz
- Frequency response:
- 32 to 22,000 Hz (-6 dB)
- In free field: 37 to 20,000 Hz (±2.5 dB)
- SPL
- Short-term Sine Wave On Axis from 100 to 3,000 Hz at 1 m: > 118 dB
- Long-term RMS under the same conditions: > 112 dB
- Maximum SPL per pair in listening room with audio material at 2 m: >122 dB
- Self-noise: < 10 dB
- Harmonic distortion:
- at 95 dB SPL at 1 m on axis
- 50 to 200 Hz: < 3%
- Above 200 Hz: <0.5%
- Power supply: 100 to 240 VAC, 50/60 Hz
- Power consumption:
- Standby: < 0.5 W
- Idle: 25 W
- Full output: 750 W
- Dimensions (H x W x D):
- Monitor: 680.0 x 400.0 x 380 mm
- Amplifier (front panel): 132 x 483 x 252 mm
- Amplifier (case): 80 x 425 x 252 mm
- Weight with built-in amplifier: 42 kg
- Weight without amplifier: 36 kg
- Amplifier: 6.0 kg
