B&C Speakers DE 10-8 Ohm - 2-hour test conducted with continuous pink noise signal in the range from the recommended crossover frequency to 20 kHz. The power is calculated at the minimum nominal impedance. The continuous power programme is defined as 3 dB higher than the nominal value. The applied RMS voltage is set to 2.83 V for the nominal impedance of 8 ohms. 12 dB/oct. or high-pass filter with a steeper slope.
Technical Specifications:
Continuous program power capacity of 40 W
1" diameter throat
25 mm (1 inch) aluminium voice coil
Polyester diaphragm
Frequency response: 1500 - 18,000 Hz (-3 dB)
Crossover frequency: > 2.5 kHz (12dB/oct)
Sensitivity: 107 dB (1W/1m)
Nominal impedance: 8 Ω
Minimum impedance: 6.3 Ω
Nominal power handling: 20 W
Continuous power handling: 40 W
Enclosure material: Aluminium
Inductance: 0.1 mH
Flux density: 1.55 T
Two M5 180° holes on a diameter of 76 mm (3 inches)
