Audac CEP 803 – Class D amplifier with eight channels and an output power of 30 watts, with low impedance 70/100V. The input connections are made with 3-pin terminal block connectors, while the output connections are made with a 4-pin terminal block connector.
This amplifier is a HE (1RU) unit of 19". To ensure maximum installation/maintenance comfort, the CEP is passively cooled.
Power at 4 Ω - 8 x 30 W at 70 V & 8 x 30 W at 100 V
THD+N (@ 1 kHz) < 0.05% (1/8 of rated power)
Crosstalk (@ 1 kHz) < 70 dB
Frequency response (± 3 dB) 110 Hz - 20 kHz
Class D technology
Protection:
Overheating
DC short circuit
Overload
Signal limiting
Convection cooling
Operating temperature 0° ~ 40° @ 95% Humidity
Power supply: 100 ~ 240 V AC / 50 ~ 60 Hz
Consumption:
Stand-By 0.6 W
Idle 17.5 W
Nominal (1/3 MUP) 150 W
Nominal (1/8 MUP) 68 W
Input connector IEC C14 connector
Input connections via miniature switches
Euro terminal block connector with 3 pins (pitch - 3.81 mm)
Outputs
Euro terminal block connector with 4 pins (pitch - 5.08 mm)
