Audac CEP 408

AUDAC CEP 408 - Amplifier with four channels and an output power of 80 watts, low impedance 70/100V, Class D. The input connections are made with 3-pin terminal block connectors, while the output connections are made with a 4-pin terminal block connector.

The multi-channel amplifier is Energy Star compliant but can be activated or deactivated using a standby switch located on the back of the device. This amplifier is a HE (1RU) unit of 19".

• RMS/AES: 4 x 80 W
• at 70 V    4 x 80 W
• at 100 V    4 x 80 W
• Output connection: 4-pin Euro Terminal Block (Pitch - 5.08 mm)
• Input connection: 3-pin Euro Terminal Block (Pitch - 3.81 mm)
• Power supply: 100 ~ 240V AC
• Signal-to-noise ratio: > 100 dB
• THD+N (@ 1 kHz): < 0.05%
• Crosstalk (@ 1 kHz): < 70 dB
• Technology: Class D
• Protection

• Standby: 0.6 W & Idle: 16.4 W
• Nominal (1/3 MUP): 196 W
• Nominal (1/8 MUP): 92 W
• DC Short circuit
• Overheating
• Overload
• Signal limiting

• Operating temperature range: 0° ~ 40° @ 95% Humidity
• Frequency response: (± 3 dB)    110 Hz - 20 kHz
• Source: 100 ~ 240 V AC / 50 ~ 60 Hz
• Sensitivity: -0.5 dB ~ 10.5 dB
• Input impedance: 10 kΩ balanced
• Connection: 3-pin Euro Terminal Block (Pitch - 3.81 mm), IEC C14
• Voltage / Output impedance:

• General 4 Ω
• 70 V / 62.5 Ω
• 100 V / 125 Ω

• 19” Rack Mount
• Unit height 1 HE
• Colour: Black RAL
• Dimensions: 482 x 44 x 355 mm
• Weight: 6.3 kg
• Steel casing